MikroTik L009UiGS-2HaxD-IN Router – High-Performance SMB Network Router with WiFi 6

The MikroTik L009UiGS-2HaxD-IN is a dual-core ARM router with 2.4 GHz Wi-Fi 6, 8 Gigabit Ethernet ports, and an SFP port with 2.5G support, designed as a direct upgrade for RB2011-based infrastructures and as a primary router for small offices, distributed environments, and technical deployments with advanced routing requirements. It is widely used in SOHO and SMB networks where high performance, full RouterOS v7 functionality — including containers, hardware IPsec, and complex firewall rules — and flexible rack mounting in limited spaces are required. The passive heatsink enclosure and 4-in-1U rack compatibility make it an efficient choice for dense server room deployments.

The router is built on a dual-core ARM IPQ-5018 at 800 MHz with 512 MB RAM and 128 MB NAND storage, delivering up to 4 times the performance of RB2011 across routing, filtering, and bridging scenarios. Hardware-accelerated IPsec provides 60-90 Mbps throughput at 1400-byte packet sizes with minimal CPU overhead. Wi-Fi 6 (802.11ax) AX600 with dual-chain external HGO antennas at 4 dBi delivers speed improvements of up to 90% over Wi-Fi 5 in the 2.4 GHz spectrum. The SFP port supports both 1G and 2.5G connectivity, Ether8 provides passive PoE-out for powering adjacent devices, and the USB 3.0 Type-A port with container support enables custom projects — Pi-hole, network services, or an external LTE modem.

The L009UiGS-2HaxD-IN integrates into existing infrastructures as a core or edge router, with the Marvell 88E6190 switch chip providing a 2.5G full-duplex connection between the CPU and all ports — eliminating bottlenecks in complex configurations. The RJ45 console port enables direct access for configuration and troubleshooting, while dual powering via DC jack and 802.3af/at PoE-in provides redundancy and flexibility across diverse installations. The enclosure supports combined mounting with other L009 or RB5009 units — up to four L009 routers in a single 1U rack space.

It is recommended for upgrading RB2011 infrastructures requiring ARM performance and RouterOS v7 capabilities, offices and technical environments with IPsec, container, or complex firewall requirements, ISP and enterprise deployments where rack density is critical, and scenarios where the 2.5G SFP port and PoE-out on the last port simplify network topology. An operating temperature range of -40°C to +70°C and CE, FCC, IC certifications confirm suitability for both office and demanding technical room environments.