Professional Parabolic Wireless Antenna MikroTik mANT30 for Point-to-Point Links

The MikroTik mANT30 is a professional-grade 5 GHz parabolic dish antenna with 30 dBi gain, built for long-distance point-to-point links where maximum signal concentration, cross-polarization isolation, and structural wind resistance are baseline requirements. Natively compatible with the BaseBox series through the included FlexGuide cable, it can also be used with any pole-mounted wireless device with a standard RP-SMA connector. Available in two versions — with a standard mount (MTAD-5G-30D3) and with a precision alignment mount (MTAD-5G-30D3-PA).

The 30 dBi gain and ±2.5 degree beamwidth deliver maximum RF energy concentration over long distances — relevant for ISP backbone and enterprise PtP links where link stability and throughput depend directly on antenna gain. Port-to-port isolation exceeding 40 dB and a front-to-back ratio above 30 dB minimize cross-polarization interference and rejection from unwanted directions, maintaining performance in congested RF environments. The ±20 degree elevation adjustment range — wider than the PA version — provides additional alignment flexibility for installations where the mounting angle is not ideal.

The 70 cm aluminum reflector handles 100W input power and survives winds up to 201 km/h — with a measured wind load of 50 kg at 40 m/s confirming structural stability on tower and exposed rooftop installations. Pole diameter compatibility from 3 to 7 cm covers the most common outdoor mounting scenarios. The tested operating range of -50°C to +80°C exceeds standard requirements for any climate. Dual RP-SMA Female connectors support simultaneous vertical and horizontal polarization.

It is the right fit for ISP backbone point-to-point links over several kilometers where 30 dBi is required for the target signal level and throughput, for enterprise installations where over 40 dB cross-polarization isolation enables dual-polarization operation without link quality degradation, for towers and exposed rooftops where 201 km/h wind survivability is a structural requirement, and for operators using BaseBox equipment who need a purpose-built parabolic antenna for that platform at a lower cost than the precision alignment version. Note: discontinued product — available as existing stock only.